SIM card installation

  Last updated: 

 

  1. Power the terminal off by pressing and holding the Power button for at least 5 seconds (when the button is released the terminal switches OFF).
  2. Remove the rear cover of the terminal using the two clips found at the top of the device.
  3. Insert the SIM into the SIM 1 slot in the lower-right corner (follow the insertion profile shown by the slot).
  4. Re-attach the cover, ensuring the clips are snapped into place.
  5. Power on the device by pressing and holding the power button for at least 2 seconds.
  6. When prompted, type in the APN "Mobius.m2m" using the keypad.
  7. If the SIM card has been successfully installed, you will see a mobile signal indicator displayed in the status bar at the top of the display.
  8. When the connection to the Trust Payments server has been established, the   icon is shown. If the connection is lost the     icon is shown.
Was this article helpful?
0 out of 0 found this helpful