First-time setup

If you intend to use a mobile data connection, please install the SIM card before proceeding.

  Installing SIM card


  1. Connect the enclosed USB-C charging cable to the left side of the device. A red light will illuminate when the device is connected to power. Let the device charge for at least 4 hours before you continue.

    smartposk-power.png


  2. Press and hold the power button on the left side of the device until the display turns on.


  3. Once the device has turned on, you will be presented with this page.

    smartposk-mainscreen.png


  4. You will need to ensure the device is connected to the internet via Wi-Fi or a 4G data connection.

      Network setup

      If a SIM card is already inserted, the device should connect to the mobile network automatically. You can check the connection by swiping up from the bottom of the screen to display the status bar at the top. A successful data connection is indicated by a   icon.

      If your device is unable to connect to 4G, please ensure your device is in an area with sufficient coverage. If you are continuing to have problems, we recommend contacting your carrier for assistance.

  5. Once the device is connected to the internet, it is ready for use.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request