Last updated: 

 

I cannot connect to TRU Link

Make sure that TRU Link is available by browsing to https://link.trustpayments.com/trustpayments/rest/sale

The following should be displayed in your browser:

HTTP GET Not Supported – Content-Type application/json POST only

If you do not see this then TRU Link is either unavailable (contact our Support Team for assistance) or your internet connection is down (contact your ISP).

How do I resolve an invalid siteid error?

The siteid you are sending in your POST Body is incorrect. Please use the siteid provided by Trust Payments. You can request to receive your siteid by contacting your Account Manager.

How do I resolve an invalid topuptoken error?

This is an input validation error. Please ensure you have sent the previous topuptoken obtained from the relevant pre-auth.

How do I resolve an offline terminal error?

Please ensure the terminal is powered on, connected to the internet, paired with POS following the steps in this article and try the request again. If the error persists, please raise with the Trust Payments Customer Support Team.

How do I resolve terminal pairing errors?
{"error":"Error parsing pairTerminal null:The terminal has not registered yet,
please make sure the terminal is plugged in and connected to the network. If
you are still experiencing problems, please contact support.","errorcode":1104}

If you are receiving this error, please try the following steps to help troubleshoot your device:


Ensure terminal is connected to internet. Click here for guidance.


Ensure your terminal is paired with Trust Payments. This is a requirement for the correct operation of your device. Click here to learn how to perform the pairing process.


This error can also occur when the terminal is attempting to pair with a new ePoS system after previously being paired to a different ePoS system. To resolve this issue:


If you have paired your terminal with Trust Payments and are still receiving this error, please allow an hour for your terminal to sync and try again.


This error can occur if the merchant or ePOS/till provider has not registered the serial number of the POS terminal within their ePOS/till system. This needs to be completed prior to testing. Going forward, the serial number of any new POS terminals installed should also be amended within this system in the same manner.


Check your site's firewall settings:

  • The Point of Sale (POS) Gateway requires access to IPs 193.179.205.46 & 193.85.236.92 over Port 11183.
  • The payment device must be able to contact dc.econduitapps.com on Ports 80 and 9001 and HTTPS proxy should be disabled.

If you are still having problems, please contact our Support Team.

Was this article helpful?
0 out of 0 found this helpful