First-time setup

  1. Connect the enclosed power cable into the base of the device. The device must remain connected to a power supply while in use.


  2. Press and hold the    button on the keypad for at least 2 seconds to turn on the device. The power up process will take approximately 1 minute to complete.


  3. Once the device has turned on, you will be presented with this page.

    X11.png


  4. You will need to ensure the device is connected to the internet via Wi-Fi or ethernet.

      Network setup


  5. Once the device is connected to the internet, it is ready for use.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request