Auto End of Day allows you to schedule an End of Day (EOD) report to automatically print daily, allowing for easier reconciliation.
Best practices
- Ensure the device is connected to power and turned on to allow the report to print.
- Schedule the report to print outside of normal opening hours to ensure the terminal is not in use when the printing starts.
- We also recommend scheduling the report to print when workers are present in case there's a paper jam or other printing error that needs attention.
- Position your device so the printed report has somewhere to land safely (not on the floor).
- Regularly check there is sufficient paper to avoid running out during the automated print.
To configure or disable Auto End of Day, you need to open the End Of Day Settings:
-
On the main screen, select "Settings" and enter the Manager Password when prompted.
-
In the Settings menu, select "System Settings".
-
In the System Settings menu, select "End Of Day Settings".
-
Here you can configure Auto End Of Day:
- Select "Enable" to turn on the feature and select a time; the report will be printed using the integrated printer daily at the time selected.
- Select "Disable" to turn off the feature.
Please ensure your device is turned on at the selected time, otherwise the print job will fail.
-
Select the green icon to save your changes or the red icon to discard them.
Not supported
This functionality is not supported on your device. You can use the drop-down above to review instructions for other supported devices.
Not supported
This functionality is not supported on your device. You can use the drop-down above to review instructions for other supported devices.
Not supported
This functionality is not supported on your device. You can use the drop-down above to review instructions for other supported devices.
Not supported
This functionality is not supported on your device. You can use the drop-down above to review instructions for other supported devices.
